High flooding point plastic super intalox saddles used in Environmental protection industry 高浸水点塑料超级矩鞍环填料，用于环保工业
Products Introduction
The shape of the Intalox Saddle Ring is a combination of the ring and the saddle, which benefits the advantages of the two. This structure helps liquid distribution and enlarges the quantities of gas holes. The Intalox Saddle Ring has less resistance, bigger flux and higher efficiency than the Pall Ring. It is one of the most widely used packing with good hardness. It has low pressure, big flux and high efficiency of mass transfer, and it is easy to manipulate.
Introduction
Technical Specification
Product name
Plastic super intalox saddle
Material
PP/RPP/PVC/CPVC/PVDF, etc
Life span
>3 years
Size inch/mm
Surface area m2/m3
Void volume %
Packing number pieces/ m3
Packing density Kg/m3
Dry packing factor m-1
1”
25 × 12.5 × 1.2
260
90
51200
92
390
1-1/2”
38 × 19 × 1.2
178
96
25200
75
201
2”
50 × 25 × 1.5
168
97
6300
76
184
3”
76 × 38 × 2.6
130
98
3700
64
138
Feature
High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer.
Advantage
1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability.2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload.
Application
These various plastic tower packing are widely used in petroleum and chemical, alkali chloride, gas and environmental protection industries with max. temperature of 280°.
Physical & Chemical Properties
Performace/Material
PE
PP
RPP
PVC
CPVC
PVDF
Density(g/cm3) (after injection molding)
0.98
0.96
1.2
1.7
1.8
Operation temp.(℃)
＞100
＞120
＞60
＞90
＞150
Chemical corrosion resistance
GOOD
Compression strength(Mpa)
＞6.0